1997 Lexus ES 300 1997 ES300 Exterior Equipment - Page 5

1997 Lexus ES 300 Manual

Page 5 highlights

EXTERIOR EQUIPMENT ! CAUTION MOON ROOF S Make sure the cap is tightened securely to prevent fuel spillage in case of an accident. S Use only a genuine Lexus fuel tank cap for replacement. It has a built-in check valve to reduce fuel tank vacuum. In case the opener is not actuated "  Open  Close Pull the manual lever toward the back. This is used in case the fuel filler door cannot be operated due to a discharged battery or other trouble. To slide open the moon roof, push the switch on the "SLIDE OPEN" side briefly. The moon roof will fully open. To stop partway, push the switch briefly. The sun shade can be opened or closed manually. However, if you open the moon roof, the sun shade will be opened with the moon roof. To close the moon roof, push the switch on the "TILT UP" side. The moon roof will move while the switch is being pushed and stop when released. However, as a precaution, it stops partway before sliding fully closed, except when already more than half closed. Therefore, release the switch then push it again to close it completely. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

EXTERIOR EQUIPMENT
53
CAUTION
!
S
Make sure the cap is tightened securely to prevent
fuel spillage in case of an accident.
S
Use only a genuine Lexus fuel tank cap for
replacement.
It has a built–in check valve to
reduce fuel tank vacuum.
In case the opener is not actuated
Pull the manual lever toward the back.
This is used in case the fuel filler door cannot be operated
due to a discharged battery or other trouble.
MOON ROOF
"
±
Open
²
Close
To slide open the moon roof, push the switch on the
“SLIDE OPEN” side briefly. The moon roof will fully
open.
To stop partway, push the switch briefly.
The sun shade can be opened or closed manually.
However,
if you open the moon roof, the sun shade will be opened with
the moon roof.
To close the moon roof, push the switch on the “TILT
UP” side.
The moon roof will move while the switch is being pushed
and stop when released. However, as a precaution, it stops
partway before sliding fully closed, except when already
more than half closed. Therefore, release the switch then
push it again to close it completely.