1997 Lexus LX 450 Owners Manual - Page 258
1997 Lexus LX 450 Manual
Page 258 highlights
ELECTRICAL COMPONENTS a. Look carefully at the fuse. If the thin wire is broken, the fuse has blown. If you are not sure or if it is too dark to see, try replacing the suspected fuse with one of the same value that you know is good. b. Only Install a fuse with the amperage rating designated on the fuse box lid. If you do not have a spare fuse, in an emergency you can pull out the "CIG," "DOME" or "A.C" fuse, which may be dispensable for normal driving, and use it if its amperage rating is the same. If you cannot use one of the same amperage, use one lower than, but as close as possible to, the amperage. If the amperage is lower than the specified, the fuse might blow out again but this does not indicate anything wrong. Be sure to get the correct fuse as soon as possible and return the substitute to its original clips. It is a good idea to purchase a set of spare fuses and keep them in your vehicle for emergencies. If the new fuse immediately blows out, there is a problem with the electrical system. Have your Lexus dealer correct it as soon as possible. " Good Melted If the headlights or other electrical components do not work and the blade type fuses are O.K., check the cartridge type fuses. If any of the cartridge type fuses are blown, they must be replaced. If there is an overload in the circuits from the battery, the fuses are designed to blow before the entire wiring harness is damaged. 243 ! CAUTION Never use a fuse with a higher amperage rating, or any other object, in place of a fuse. This may cause extensive damage and possibly a fire. CHECKING THE CARTRIDGE TYPE FUSES