1998 Lexus LS 400 Owners Manual - Page 77

INTERIOR EQUIPMENT 3. When the frequency and code is registered, the indicator light flashes rapidly. Then you can release both buttons. 4. If you wish, repeat the procedure for each remaining button for another garage door opener. If you want to write a new program over the program set already, select a button you want to program and repeat the procedure from step 1. The previous program is erased and a new program will be set. If the transmitter has a "rolling code" feature, it is necessary to program the garage door opener receiver on the garage, after programming the garage door opener on the vehicle,. For the setting of the receiver, refer to the instruction manual for the receiver. After setting the receiver, push the programmed button on the vehicle for about 1 to 2 seconds within the operational range. The old-type garage door openers manufactured before 1982 cannot be programmed in this system. CAUTION When programming or operating the garage door opener, make sure there is no one around the moving door. It is dangerous if someone is caught. (b) Operating the garage door opener Push the appropriate button to activate the garage door opener. The indicator light comes on. The garage door opener continues to send the signal for up to 20 seconds as long as the button is pushed. 77