2001 Lexus RX 300 Owners Manual - Page 157

COMFORT ADJUSTMENT If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "Using a top strap" on page 129.) For the installation details, refer to the instruction manual equipped with each product. DRIVING POSITION MEMORY SYSTEM The micro computer can memorize the position of the driver's seat. Two different driving position profiles can be entered into the computer's memory. Recording a driving position in the computer's memory can only be done when the ignition key is in the "ON" position and the selector lever is in the "P" position. CAUTION D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. D Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. D Do not put a child restraint system on the rear seat if it interferes with the lock mechanism of the front seats. This can cause severe injury to the child and front passenger in case of sudden braking or a collision. Setting a driving position 16R058a 1. Adjust the driver's seat to the desired position. 2. While pushing the "SET" button, push button "1" or "2" until the signal beeps. The beep sound means that the positions are recorded in the computer's memory. 134 2001 MY RX300_U (OM48431U)