2004 Lexus LS 430 Navigation Manual - Page 127

AUDIO SYSTEM Cassette tape player operation (a) Playing a cassette tape (b) Manual program selection When you insert a cassette tape, the exposed tape should face to the right. The player will automatically start when you insert a cassette tape. At this time, "Tape" appears on the display. If a metal or chrome equivalent cassette tape is put in the cassette player, the player will automatically recognize it and "MTL" appears on the display. To stop or eject the cassette tape, push the " " button. If a cassette is already in the slot, push the "TAPE" button. Dolbyr Noise Reduction* feature: If you are listening to a tape that was recorded with Dolbyr B Noise Reduction, touch the switch " marked with the double-D symbol. The " switch will be highlighted in green. Touch the switch again to turn off Dolbyr B NR. The Dolby NR mode reduces tape noise by about 10 dB. For best sound reproduction, play your tapes with this switch on or off according to the mode used for recording the tape. * Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double-D are trademarks of Dolby Laborasymbol tories Licensing Corporation. Reverse switch: You can reverse the tape by touching the " A " " switch or "PROG" button. The display will show the opposite direction after reversing the tape. Also if the tape reaches the end of one side, it is automatically reversed to the other side. Fast forward and Rewind switches: You can fast forward or fast rewind by touching the "AA" or """" switch. To stop the tape while it is fast forwarding, touch """", to stop the tape while it is rewinding, touch "AA". If a tape rewinds completely, the cassette player will stop and then play the same side. If a tape fast forwards completely, the cassette player will play the other side of the tape using the auto-reverse feature. VI 169