2004 Lexus RX 330 Owners Manual - Page 125

GAUGES, METERS AND SERVICE REMINDER INDICATORS The following information is displayed in the instrument cluster when you push the "INFO" button with the ignition switch turned on. Each time you push the "INFO" button, the display toggles through this information. (1) Driving time after engine start (2) Average vehicle speed after engine start (3) Average fuel consumption after refueling (4) Instantaneous fuel consumption (5) Driving distance after engine start (6) Driving range The displayed values in the cruise information display indicate general driving conditions. Accuracy varies with driving habits and road conditions. When the ignition switch is on, the last previously used mode displayed just before the ignition switch is off will appear. If the electrical power source has been disconnected from the cruise information display, the display will automatically be set to the initial mode. When the instrument panel lights are turned on, the brightness of the display will be reduced. You can adjust the brightness of the display. To adjust the brightness, see "Multi-display light control" on page 91. CAUTION Do not adjust the display while the vehicle is moving. Be sure to adjust the display only when the vehicle is stopped. (1) Driving time after engine start ("E/T") The elapsed time after the engine starts is displayed. When the engine is started, driving time is counted from 0:00. Up to 11:59 (11 hours, 59 minutes) can be displayed. When the driving time exceeds 11:59, the counter returns to 0:00. The calculation is reset when the ignition switch is turned off. 102