2006 Lexus ES 330 Owners Manual - Page 159

OCCUPANT RESTRAINT SYSTEM By repeating these two steps and pressing the remaining button, the driving position for another driver can be recorded. To set a new memorized position, select the desired position and perform step 2. The previous memory will be erased and the new position will be set. To make only slight changes to an already memorized position, the easiest way is to first activate the memorized position, then make the desired changes and perform step 2 above. Conditions for memorized position activation D Ignition key "ON" and selector lever in "P" position D Ignition switch off and within 30 seconds of opening driver's door If any driving position memory switch is pushed while one of the memorized driving position profiles is being activated, the operation will stop. To activate the system, push the desired button ("1" or "2") again. The driving position memory control system cannot be operated while the vehicle is moving. If the vehicle's battery is disconnected, the computer's memory will be erased and the memorized positions will have to be set again. Recalling the memorized position CAUTION D Do not start the vehicle while the adjustments are being made. When you push button "1" or "2", the driving position will be automatically adjusted to the position recorded for that button. D Take care not to select the wrong button, or the seat could strike the rear passenger or hit your body against the steering wheel. If this happens, you can stop the movement by pressing another driving position memory switch. 159