2006 Lexus RX 330 Owners Manual - Page 250

OCCUPANT RESTRAINT SYSTEMS Setting the driving position Recalling the memorized position 1. Adjust the driver's seat, tilt and telescopic steering and outside rear view mirrors to the desired position. 2. While pushing the "SET" button, push button "1" or "2" until the signal beeps. The beep sound means that the positions are recorded in the computer's memory. By repeating these two steps and pressing the remaining button, the driving position for another driver can be recorded. To set a new memorized position, select the desired position and perform step 2. The previous memory will be erased and the new position will be set. To make only slight changes to an already memorized position, the easiest way is to first activate the memorized position, then make the desired changes and perform step 2 above. When you push button "1" or "2", the driving position will be automatically adjusted to the position recorded for that button. Conditions for memorized position activation D Ignition key "ON" and selector lever in "P" position. All parts of the memorized positions can be activated. D Key not in ignition switch and within 30 seconds of opening driver's door. The memorized position can be activated, except for the tilt and telescopic steering. 225