2010 Lexus RX 450h User Guide 2 - Page 496

4-3. Do-it-yourself maintenance n Initializing the tire pressure warning system Initialize the tire pressure warning system with the tire inflation pressure adjusted to the specified level. n If you push the tire pressure warning reset switch accidentally If initialization is performed, adjust the tire inflation pressure to the specified level and initialize the tire pressure warning system again. n When the initialization of the tire pressure warning system has failed Initialization can be completed in a few minutes. However, in the following cases, the settings have not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Lexus dealer. l When operating the tire pressure warning reset button, the tire pressure warn- ing light does not flash 3 times. l After carrying out the initialization procedure, the tire pressure warning light flashes for 1 minute then stays on after driving for 20 minutes. n Routine tire inflation pressure checks The tire pressure warning system does not replace routine tire inflation pressure checks. Make sure to check tire inflation pressure as part of your routine of daily vehicle checks. 4 Maintenance and care 501