2010 Lexus RX 450h User Guide - Page 149

1-8. Safety information STEP 3 Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. STEP 4 Fully extend the shoulder belt and allow it to retract to put it in lock mode. In lock mode, the belt cannot be extended. STEP 5 While pushing the child restraint system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended. STEP 6 If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. (→P. 152) 150