2011 Lexus HS 250h Owners Manual - Page 801

AUDIO/VIDEO SYSTEM (e) Presetting a channel 1. Tune in the desired channel. U6004LC 2. Select one of the channel selector buttons (1 - 6) and hold it until a beep is heard. This sets the channels to the button and the name and number of the channel appears on the button. Each button can store three SAT channels. To change the preset channel to a different one, follow the same procedure. The preset channel memory is cancelled when the power source is interrupted by 12−volt battery disconnection or a blown fuse. (f) Selecting a channel Tune in the desired channel using one of the following methods. Preset tuning: Select the channel selector button (1 - 6) for the channel you want. The button (1 - 6) is highlighted and channel number appears on the display. To select channel within the current category: Push the "Ɯ" or "Ɲ" button of the "SEEK/TRACK". The radio will step up or down the channel within the current channel category. U6004LC To scan the currently selected channel category: Select "SCAN" briefly. "SCAN" appears on the display. The radio will find the next channel in the same channel category, stay there for a few seconds, and then scan again. To select a channel, select "SCAN" a second time. To scan the preset channels: Select "SCAN" and hold it until you hear a beep. "P.SCAN" appears on the display. The radio will find the next preset channel, stay there for a few seconds, and then move to the next preset channel. To select a channel, select "SCAN" a second time. 204