2011 Lexus LS 600h Owners Manual - Page 315
2011 Lexus LS 600h Manual
Page 315 highlights
2-4. Using other driving systems CAUTION l Do not disassemble the sensor. l Do not attach accessories or stickers to the sensor, grille or surrounding area. l Do not modify or paint the sensor and grille. n Handling the driver monitor sensor (with driver monitor system) Observe the following to ensure the driver monitor sensor can function effectively. Failure to do so may result in a malfunction or may prevent the system from correctly determining the direction the driver is facing. l Do not disassemble, damage, lift or pull on the sensor. l Do not touch the sensor while driving. l Do not wet or spill water on the sensor. l Do not drop anything on or allow anything to hit against the sensor. Do not subject the sensor to an impact. l Make sure that there are no scratches, dirt or stickers on the side of the sensor that faces the driver. l Do not place any objects in front of the side of the sensor that faces the driver or cover the sensor. n Handling the camera sensors (with driver monitor system) Observe the following to ensure that the PCS functions correctly: l Keep the windshield clean at all times. PCS effectiveness may be reduced due to the presence of raindrops, condensation, ice or snow on the windshield. l Do not change the installation position of a camera sensor, or remove and reinstall it. The direction of a camera sensor is precisely adjusted. l When it is cold, using the heater with air blowing to the feet may allow the upper part of the windshield to fog up. This will have a negative effect on the images. In such a case, use the windshield defogger to provide warm, dry air to the windshield. l Do not place anything on the dashboard. Images reflected on the windshield may reduce the effectiveness of a camera sensor. l Do not attach a sticker or other items to the windshield near a camera sensor. 2 When driving 315