2012 Lexus GX 460 Owners Manual - Page 982

SCHEDULED MAINTENANCE LOG 114 Months or 95,000 Miles J Inspect and adjust all fluid levels J Reset maintenance reminder light J Rotate tires J Visually inspect brake pads, calipers and rotors J Check installation of driver's floor mat J Road-test vehicle Note: If 0W-20 oil was not used at last oil change, or if you drive primarily under certain special operating conditions, you should also replace the engine oil with 0W-20 oil and replace the oil filter. See page 44 for conditions that apply. Some conditions require additional maintenance. See below. If you drive primarily under either of these special operating conditions, perform these additional items: Driving off-road, on dirt roads or on dusty roads: J Inspect axle shaft boots J Inspect ball joints and dust covers J Inspect engine air filter J Inspect steering linkage and boots J Lubricate drive shaft; re-torque nuts and bolts J Tighten nuts and bolts on chassis Towing a trailer, using a car-top carrier or heavy vehicle loading: J Lubricate drive shaft; re-torque nuts and bolts J Tighten nuts and bolts on chassis 120 Months or 100,000 Miles J Replace engine oil with 0W-20 oil; replace oil filter J Reset maintenance reminder light J Rotate tires J Replace engine coolant (see page 70) J Visually inspect brake pads, calipers and rotors J Check installation of driver's floor mat J Road-test vehicle If you drive primarily under either of these special operating conditions, perform these additional items: Driving off-road, on dirt roads or on dusty roads: J Inspect axle shaft boots J Inspect ball joints and dust covers J Inspect engine air filter J Inspect steering linkage and boots J Lubricate drive shaft; re-torque nuts and bolts J Tighten nuts and bolts on chassis Towing a trailer, using a car-top carrier or heavy vehicle loading: J Lubricate drive shaft; re-torque nuts and bolts J Tighten nuts and bolts on chassis MAINTENANCE Date: _____ Mileage: _____ Date: _____ Mileage: _____ 60 Scheduled Maintenance Log