2012 Lexus IS F Owners Manual - Page 511
2012 Lexus IS F Manual
Page 511 highlights
6-1. Specifications Lubrication system Oil capacity (Drain and refill ⎯ reference*) without filter with filter 8.7 qt. (8.2 L, 7.2 Imp. qt.) 9.8 qt. (9.3 L, 8.2 Imp. qt.) *: The engine oil capacity is a reference quantity to be used when exchanging. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick.
516
6-1. Specifications
Lubrication system
*
:
The engine oil capacity is a reference quantity to be used when exchanging.
Warm up and turn off the engine, wait more than 5 minutes, and check the oil
level on the dipstick.
■
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil” or equivalent to satisfy the follow-
ing grade and viscosity.
Oil grade: ILSAC multigrade engine oil
Recommended viscosity: SAE 5W-30
SAE 5W-30 is the best choice for
good fuel economy and good
starting in cold weather.
If SAE 5W-30 is not available,
SAE 10W-30 oil may be used.
However, it should be replaced
with SAE 5W-30 at the next oil
change.
Oil capacity
(Drain and refill
⎯
reference
*
)
without filter
8.7 qt. (8.2 L, 7.2 Imp. qt.)
with filter
9.8 qt. (9.3 L, 8.2 Imp. qt.)
Outside temperature