2012 Lexus LS 460 Navigation Manual - Page 152

AUDIO/VIDEO SYSTEM - Radio operation D LISTENING TO THE RADIO Your radio automatically changes to stereo reception when a stereo broadcast is received. "ST" appears on the screen. If the signal becomes weak, the radio reduces the amount of channel separation to prevent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono reception. In this case, "ST" disappears from the screen. D PRESETTING A STATION Push the "AM·FM", "AM" or "FM" button, or push the "AUDIO" button to display audio screen and touch "AM" or "FM" tab to choose either an AM or FM station. "AM", "FM1" or "FM2" appears on the screen. If your vehicle is equipped with a satellite radio broadcast system, when you push the "SAT" button or touch "SAT" tab on audio screen, "SAT1", "SAT2", "SAT3" station appears on the display. For details about satellite radio broadcast, see "- Radio operation (XMr Satellite Radio broadcast)" on page 178. 1. Tune in the desired station. 2. Touch one of the buttons (1 - 6) you want and hold it until a beep is heard. This sets the station to the button and the frequency appears on the button. Each radio mode (AM, FM1 or FM2) can store up to 6 stations. To change the preset station to a different one, follow the same procedure. The preset station memory is cancelled when the power source is interrupted by 12−volt battery disconnection or a blown fuse. D SELECTING A STATION Tune in the desired station using one of the following methods. Preset tuning: Touch the button (1 - 6) or push the " " or " " button of "CH·DISC" for the station you want. The button is highlighted and the station frequency appears on the screen. Turn the knob clockwise to step up the station band or counterclockwise to step down. 176