2012 Lexus RX 350 Owners Manual - Page 77

78

1-3. Adjustable components (seats, mirrors, steering wheel)

■

When driving position memory is linked with door unlock operation

If the driver’s door is opened, the driver’s seat will move toward the memorized

position but stop slightly beforehand to allow easy access to the vehicle.

Turning the “ENGINE START STOP” switch to ACCESSORY mode or fastening

the driver’s seat belt moves the seat fully into the memorized position.

■

Canceling the linked door unlock operation

Turn the “ENGINE START STOP” switch to IGNITION ON mode and

close the driver's door.

While pressing the “SET” button, press the driver’s door lock switches

(either lock or unlock) until the signal beeps.

■

Operating the driving position memory after turning the °ENGINE START

STOP± switch off

Memorized positions (except for the steering wheel position) can be activated up

to 180 seconds after the driver’s door is opened and another 60 seconds after it is

closed again, even after turning the “ENGINE START STOP” switch off.

■

Stopping seat position operation part-way through

Perform any of the following operations:

●

Press the “SET” button.

●

Press button “1”, “2” or “3”.

●

Adjust the seat using the switches (only cancels seat position recall).

●

Adjust the steering wheel using the tilt and telescopic steering control switch

(only cancels steering wheel position recall).

■

Correct seat position

When the seat is in the most forward or most backward position, and the seat is

being moved in those directions, the system may not correctly recognize the cur-

rent position and the memorized position will not be correctly recalled.

■

The auto away function for exiting the driver seat

If the seat is already close to the rearmost position, the auto away function may not

operate when the driver exits the vehicle.

■

Customization

The distance that the driver’s seat moves backward during the auto away function

can be changed. (Customizable features

→

P. 645)

STEP

1

STEP

2