2013 Lexus ES 300 Owners Manual - Page 184
2013 Lexus ES 300 Manual
Page 184 highlights
4-2. Driving procedures
ES350 300h_OM_OM33A01U_(U)
4-2. Driving procedures
■
When the steering lock cannot be released
■
Steering lock motor overheating prevention
To prevent the steering lock motor from overheating, the motor may be suspended if
the hybrid system is turned on and off repeatedly in a short period of time. In this
case, refrain from operating the hybrid system. After about 10 seconds, the steering
lock motor will resume functioning.
■
When °Check Access System with Elec. Key± is displayed on the multi-information
display
The system may be malfunctioning. Have the vehicle inspected by your Lexus dealer
immediately.
■
If the °READY± indicator does not come on
If the °READY± indicator does not come on when you press the °POWER± switch
with the shift lever in P and the brake pedal depressed, contact your Lexus dealer
immediately.
■
If the hybrid system is malfunctioning
→
P. 762
■
If the electronic key battery is depleted
→
P. 710
■
Operation of the °POWER± switch
●
When operating the °POWER± switch, one short, firm press is enough. If the switch
is pressed improperly, the hybrid system may not start or the °POWER± switch
mode may not change. It is not necessary to press and hold the switch.
●
If attempting to restart the hybrid system immediately after turning the °POWER±
switch off, the hybrid system may not start in some cases. After turning the
°POWER± switch off, please wait a few seconds before restarting the hybrid sys-
tem.
■
If the smart access system with push-button start has been deactivated in a cus-
tomized setting
→
P. 802
°Steering Lock active± will be displayed on
the multi-information display.
Check that the shift lever is set in P. Press the
°POWER± switch while turning the steering
wheel left and right.