2013 Lexus LX 570 Owners Manual - Page 775

4-3. Do-it-yourself maintenance n How to initialize the tire pressure warning system STEP 1 Park the vehicle in safe place and turn the "ENGINE START STOP" switch to OFF. While the vehicle is moving, initialization is not performed. STEP 2 Adjust the tire inflation pressure to the specified cold tire inflation pressure level. (→P. 887) Make sure to adjust the tire pressure to the specified cold tire inflation pressure level. The tire pressure warning system will operate based on this pressure level. STEP 3 STEP 4 Turn the "ENGINE START STOP" switch to IGNITION ON mode. Push and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly 3 times and a message appears on the multiinformation display. 4 Maintenance and care STEP 5 Wait for a few minutes with the IGNITION ON mode, and then turn the "ENGINE START STOP" switch to OFF. Registering ID codes The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code of tire pressure warning valve and transmitter. Have the ID code registered by your Lexus dealer. 761 LX570_U (OM60G53U)