1999 Lincoln Navigator Owner Guide 1st Printing - Page 75

Controls and features The illuminated entry system will turn off the interior lights if the ignition switch is turned to the RUN position, or if the remote transmitter lock control is pressed, or after 25 seconds of illumination. The inside lights will not turn off if: • they have been turned on with the dimmer control or • any door is open. The battery save feature will turn off the interior lights 45 minutes after the last door is closed, even if the dimmer control is on. Memory seat/mirrors/adjustable pedal (if equipped) feature The memory feature allows automatic positioning of the driver seat, side mirrors and adjustable pedals (if equipped) to three programmable positions. • To program position one, move the driver seat, both side mirrors, and adjustable pedals (if equipped) to the desired positions. Press the SET control. The SET control indicator light will briefly illuminate. While the light is illuminated, press control 1. • To program position two, repeat the previous procedure using control 2. • To program position three, repeat the previous procedure but press controls 1 and 2 simultaneously. The memory feature also allows you to recall previously stored positions with your remote transmitter(s). Up to three remote transmitters can be activated to utilize the memory recall positions. Press this control to move to the previously stored seat/mirror/adjustable pedal (if equipped) positions. Activating/deactivating the memory feature on your remote transmitter The memory feature from the remote transmitter can be turned off/on, however, the memory control buttons will continue to operate. Before following the procedure, make sure that the ignition is OFF and all doors and the liftgate window are closed. You must complete steps 1-7 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds. 1. Turn the ignition key to RUN. 2. Press the power door unlock control three times. 75