1999 Lincoln Town Car Owner Guide 1st Printing - Page 173

Maintenance and care 4. Turn the headlamps on and make sure they work properly. If the headlamp was correctly aligned before you changed the bulb, you should not need to align it again. 5. Carefully insert the headlamp assembly into the vehicle making sure the retainer pins are inserted into the proper holes and into the guides. 6. Install protective cover on vehicle locking it in place with knobs. Replacing front parking lamp/turn signal bulbs 1. Make sure the headlamp control is in the OFF position. 2. Open the hood. 3. Twist the plastic knobs and remove the protective cover from the back of the headlamps. Lift the cover and pull towards the windshield. 4. Remove headlamp by taking the retainer pins out. Pull headlamp forward to access bulb connector. 5. Disconnect the electrical connector from the bulb socket. 6. Rotate the bulb socket counterclockwise about 1⁄4 turn and remove from lamp assembly. 7. Carefully pull the bulb straight out of socket and push in the new bulb. 8. To complete installation, follow the removal procedure in reverse order. High-mount brakelamp bulbs For bulb replacement, see a dealer or qualified technician. 173