2004 Lincoln Aviator Owner Guide 3rd Printing (Spanish) - Page 627

Driving Trailer hitch cover Your vehicle is equipped with a removable trailer hitch trim cover. To remove the trim cover: 1. Loosen the two push pins in the bottom of the cover by turning them counterclockwise with a flathead screwdriver or similar object. 2. To reinstall the cover, insert the three plastic tabs into their slots (as shown in the illustration) and push the cover up into the bumper trim. 3. Hold the cover against the bumper trim and reinstall the two screws. Preparing to tow Use the proper equipment for towing a trailer and make sure it is properly attached to your vehicle. See your dealer or a reliable trailer dealer if you require assistance. Hitches Do not use hitches that clamp onto the vehicle bumper; use a load-carrying hitch. You must distribute the load in your trailer so that 10-15% of the total weight of the trailer is on the tongue, not to exceed the maximum tongue loads as stated: • Class II receiver: 159 kg (350 lbs.) • Class III/IV receiver: 227 kg (500 lbs.) (weight-carrying)/331 kg (730 lbs.) (weight-distributing) 243