2005 Lincoln Navigator Owner Guide 3rd Printing (Spanish) - Page 830

Maintenance and Specifications transmission application requiring MERCON௡ SP may cause transmission damage. Use of any fluid other than the recommended fluid may cause transmission damage. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 3 4 2 Add the coolant type originally equipped in your vehicle. Your vehicle's rear axle is filled with a synthetic rear axle lubricant and is considered lubricated for life. These lubricants are not to be checked or changed unless a leak is suspected, service is required or the axle has been submerged in water. The axle lubricant should be changed any time the axle has been submerged in water. Service refill capacities are determined by filling the rear axle 0.9 inch (23mm) below the bottom of the filler hole. Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C930-A and the API Certification mark. LUBRICANT SPECIFICATIONS Item Ford part name Multi-Purpose Grease Ford part number XG-4 or XL-5 Ford specification ESR-M1C159-A or ESB-M1C93-B 5 Hinges, latches, striker plates and rotors, seat tracks, fuel filler door hinge and spring Lock cylinders Penetrating and Lock Lubricant Brake fluid Motorcraft High Performance DOT 3 Motor Vehicle Brake Fluid 386 XL-1 PM-1 ESB-M2C75-B ESA-M6C25-A and DOT 3 2005 Navigator (nav) Owners Guide (post-2002-fmt) USA_English (fus)