2006 Lincoln Mark LT Owner's Manual - Page 126

Tires, Wheels and Loading Conventional spare tire information If you have the spare tire that is the same size as your other road tires, you can use the spare as you would any of the other tires. The spare tire will be equivalent to your road tires, although it may not have the same appearance (black-side wall instead of outlined-white letters). Location of the spare tire and tools The spare tire and tools for your vehicle are stowed in the following locations: Tool Spare tire Jack, jack handle and lug nut wrench Removing the spare tire 1. Use the ignition key to remove the lock cylinder from the access hole of the bumper to allow access to the guide tube. Assemble the jack handle as shown in the illustration. Location Under the vehicle, just forward of the rear bumper Under the rear seat on the passenger side 2. Fully insert the jack handle through the bumper hole and into the guide tube through the access hole in the rear bumper. 3. Turn the handle counterclockwise until tire is lowered to the ground, the tire can be slid rearward and the cable is slightly slack. 4. Slide the retainer through the center of the wheel. 126 2006 Mark LT (mlt) Owners Guide (post-2002-fmt) USA (fus)