2006 Lincoln Zephyr Owner Guide 3rd Printing - Page 88

Locks and Security Keyless entry key pad procedure 1. Turn the ignition to the 1 (LOCK) position. 2. Close all the doors. 3. Enter factory-set 5-digit entry code. 4. Press and hold the 3 • 4. While holding the 3 • 4 press the 7 • 8. 5. Release the 7 • 8. 6. Release the 3 • 4. The user should receive a horn chirp to indicate the system has been disabled or a chirp followed by a honk to indicate the system has been enabled. Deactivating/activating autounlock feature Your vehicle comes with the autounlock features activated; there are three methods to enable/disable this feature: • Through your authorized dealer, • by using a power door unlock/lock sequence, or • using a keypad procedure. Note: The autounlock feature can be activated/deactivated independently of the autolock feature. Power door unlock/lock procedure Before starting, ensure the ignition is in the 1 (LOCK) position and all vehicle doors are closed. You must complete Steps 1-5 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, wait a minimum of 30 seconds before beginning again. 1. Place the key in the ignition and turn the ignition to the 3 (RUN) position. 2. Press the power door unlock control on the door panel three times. 3. Turn the ignition from the 3 (RUN) position to the 1 (LOCK) position. 4. Press the power door unlock control on the door panel three times. 88 2006 Zephyr (378) Owners Guide (post-2002-fmt) USA (fus)