2010 Lincoln MKS Owner Guide 2nd Printing - Page 61

Lights For significant blockages (e.g. bird dropping, bug splatter, snow, or ice), the automatic high beam system uses a blocked sensor computer program. If a blockage is detected and no changes are observed, the system will go into low beam mode until the blockage is cleared. If blockages are repeatedly detected, the system will stay in low beam mode for the remainder of the ignition cycle unless the system is able to begin detecting other vehicles again. If it appears that automatic control of the high beams is not functioning properly, check the windshield in front of the camera for blockage. Flash to pass Pull and release to activate. Daytime running lamps (DRL) (if equipped) To activate: • the ignition must be in the on position, • the headlamp control must be in the off, autolamps or parking lamp position and • the transmission must be out of the P (Park) position. WARNING: Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Lamp (DRL) system does not activate the tail lamps and generally may not provide adequate lighting during these conditions. Failure to activate your headlamps under these conditions may result in a collision. 61 2010 MKS (mks) Owners Guide, 2nd Printing USA (fus)