2010 Lincoln MKZ Owner Guide 3rd Printing - Page 60

Lights Replacing headlamp bulbs High beam/low beam bulb replacement For driver side replacement of the high beam/low beam bulbs, do the following: 1. Make sure the headlamp switch is in the off position, then open the hood. 2. Reach over the front bolster and remove the rubber bulb access cover from the headlamp housing. 3. Remove the bulb socket by rotating it counterclockwise, then pull it straight out of the lamp assembly. 4. Disconnect the electrical connector. For passenger side replacement of the high beam bulb, see your authorized dealer. For passenger side replacement of the low beam bulb, do the following: 1. Turn the steering wheel all the way to the left. 2. Remove the press pins located in the wheel well and pull the tire splash shield back. 3. Reaching through the wheel well, remove the rubber headlamp bulb access cover. 60 2010 MKZ (378) Owners Guide, 3rd Printing USA (fus)