2010 Lincoln Navigator Owner Guide 1st Printing - Page 370
2010 Lincoln Navigator Manual
Page 370 highlights
370 Item Capacity Ford part name Ford part number / Ford specification XY-75W140-QL / WSL-M2C192-A XL-12 / - ZC-32-A / WSB-M8B16-A2 Rear axle fluid-Conventional differential (9.75 inch axle) Transfer case fluid (4X4) 4.5 pints (2.1L) 1.6-1.8 quarts (1.5-1.7L) 4.5 quarts (4.1L) Motorcraft SAE 75W-140 Synthetic Rear Axle Lube5 Windshield washer fluid Fuel tank (Standard) Motorcraft Transfer Case Fluid Motorcraft Premium Windshield Washer Concentrate 2010 Navigator (nav) Owners Guide (own2002), 1st Printing USA (fus) Maintenance and Specifications 28.0 gallons - - (106.0L) 33.5 gallons Fuel tank (Navigator L) - - (126.8L) 1 Add the coolant type originally equipped in your vehicle. 2 Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C930-A and the API Certification mark. 3 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. 4 Automatic transmissions that require MERCON LV should only use MERCON LV fluid. Refer to scheduled maintenance information to determine the correct service interval. Use of any fluid other than the recommended fluid may cause transmission damage. 5 Your vehicle's rear axle is filled with a synthetic rear axle lubricant and is considered lubricated for life. These lubricants are not to be checked or changed unless a leak is suspected, service is required or the axle has been submerged in water. The axle lubricant should be changed any time the axle has been submerged in water.