2013 Lincoln MKT Owner Manual Printing 2 - Page 147

Seats Programming a memory position Note: A memory position may be programmed at any time. 147 • To program position 1, move the memory features to the desired positions using the associated controls. Press and hold button 1 for at least two seconds. A chime will sound confirming that a memory position has been set. • To program position 2 and 3, repeat the previous procedure using the respective buttons. Recalling a memory position A programmed memory position can be recalled: • in any gearshift position if the ignition is not on. • only in position P or N if the ignition is on. Press the desired memory control to recall a memory position. Recalling memory positions with the remote control The memory positions are also recalled when you press unlock on your remote control (if the transmitter is programmed to a memory position) or, when you enter a valid personal entry code that is programmed to a memory position. If the easy entry feature is enabled, the seat will first move to the easy entry position. The seat will move to the final position when the key is in the ignition or when the push button start system (if equipped) is put in accessory mode/started. To program the memory feature to a remote control, refer to Keys and remote control. Easy access/easy out feature This feature automatically moves the steering wheel all the way up and in and moves the driver's seat rearward 2 in. (5 cm) when: • the transmission selector lever is in position N or P • the ignition is turned off The seat and steering wheel will move to the original position when: • the transmission selector lever is in position N or P • the ignition is put in accessory mode or is started The easy entry feature can be turned off or on through the information display. Refer to the Information Displays chapter. 2013 MKT (mkt) Owners Guide gf, 2nd Printing USA (fus)