2013 Lincoln MKT Quick Reference Guide Printing 2 - Page 6

Convenience Console Refrigerator/ Freezer*: Before using, flip the console lid forward and then remove the cover (make sure to reinstall the cover to help maintain the temperature). For the refrigerator, press the COOL control. In this mode, the system will cool to approximately 41°F (5°C). For the Freezer, press the FREEZE control. The system will cool to approximately 23°F (-5°C). Press the selected control again to turn the system off. Note: Your ignition must be on for this system to operate. Memory function: Allows one touch recall of memory positions for the driver seat, power mirrors, steering column and power adjustable foot pedals. Use the memory controls located on the driver's door to program and then recall memory positions. To Program position 1, press and hold the 1 button until you hear a chime. Use this same procedure to set positions 2 and 3 using the respective buttons. You can now use these controls to recall the set memory positions. Intelligent Access (IA) Remote Entry Icons: Press once to lock all doors. Press again within three seconds to confirm all doors are locked. Press once to unlock the driver's door. Press again within three seconds to unlock all doors. to activate the Press panic alarm. Press again or turn on the ignition to deactivate. Press twice within three seconds to open the liftgate. To unlock and open the driver's door, pull the front exterior door handle. To lock the doors, touch the sensor button on the door handle. To unlock and open the liftgate, twice  ar finder: Press C within three seconds to locate your vehicle. The horn will chirp and the lamps will flash. Intelligent Access (IA) Key: Note: Your intelligent access key must be within three feet of the vehicle for intelligent access to function properly. press the exterior liftgate release button above the license plate. The intelligent access key also contains a mechanical key blade, which can be used to unlock the driver door if necessary. Remote Start: Remote start allows you to start the engine from outside your vehicle using your transmitter. To start, press and then press twice within three seconds. Once inside, apply the brake while pressing the ENGINE START/STOP button. Shift into D (Drive) and go. If you have an integrated keyhead transmitter, simply insert the key into the ignition and turn the ignition on as you normally would before driving. To turn the engine off from outside the vehicle after using your remote start, press once. COMFORT L I NCO L N MKT Heated and cooled front seats: To access, press the Climate corner on the touch screen. For heated front seats, press repeatedly to cycle through the various heat modes and off. For cooled front seats, press repeatedly to cycle through the various cooling modes and off. Second-Row Heated and Cooled Seats*: These controls are located on the rear of the floor console. Press continuously to cycle through the various heat modes and off. Press repeatedly to cycle through the various cooling modes and off. PowerFold® Third-Row Seat*: The third-row seat features a one-touch power operation that allows you to adjust the seats with the touch of a button. The buttons are located behind the third-row seats on the left-hand quarter trim panel. To use, press the RH/BOTH/ LH button to select the right seat, the left seat or both seats you want to move. Then select the desired seat position:  Press the STOW button to stow the seat into the tub floor.  Press the FOLD button (the top portion of the button) to fold the seat back down. Press the NORMAL button to return the seat to the normal seating position. Note: The power folding seats work only when the vehicle is in P (Park) and the liftgate is open. Heated steering wheel*: Your vehicle may be equipped with a heated steering wheel. Press the icon to turn this feature on and off. Note: The wood trim will not heat between the 10 and 2 o'clock positions. Panoramic Vista Roof ® and Power Sunshades*: To open, press and release the overhead moonroof switch . The front and rear sunshades will open entirely, and the glass panel will open to the first position. Press again to fully open. To close, pull the switch down. The glass panel will stop at the first position. Pull again and hold to fully close the glass panel and the sunshades. To vent from a closed position, press the TILT button. To close from a venting position, pull the TILT button. 10 * if equipped 11