2013 Lincoln MKX Owner Manual Printing 3 - Page 31

30 Child Safety The tether strap anchors in your vehicle are in the following positions (shown from top view): Perform the following steps to install a child safety seat with tether anchors: Note: If you install a child seat with rigid LATCH attachments, do not tighten the tether strap enough to lift the child seat off your vehicle seat cushion when the child is seated in it. Keep the tether strap just snug without lifting the front of the child seat. Keeping the child seat just touching your vehicle seat gives the best protection in a severe crash. 1. Route the child safety seat tether strap over the back of the seat. For outboard seating positions, route the tether strap under the head restraint and between the head restraint posts. For the center seating positions, route the tether strap over the top of the head restraint. If needed, the head restraints can also be removed. 2. Locate the correct anchor behind the gap cover for the selected seating position. 3. Pull the gap cover reward to expose the anchors. Clip the tether strap to the anchor as shown. 2013 MKX (mkx) Owners Guide gf, 3rd Printing USA (fus)