2002 Mazda B2300 Owner's Manual - Page 88
2002 Mazda B2300 Manual
Page 88 highlights
Driver Controls 3. To change the zone setting, push and hold the right button until ZONE appears in the display. 4. Press the right button repeatedly until desired compass zone number is displayed. The display will change back to the compass direction after 3 seconds when the button is not activated. COMPASS CALIBRATION ADJUSTMENT The compass calibrates itself under normal driving conditions. There is not a need for manual compass calibration. If calibration is still desired, follow these instructions: 1. Start the vehicle. 2. For optimum calibration, turn off all electrical accessories and make sure that all vehicle doors are shut. 3. Perform this adjustment in an open area free from steel structures and high voltage lines. 4. Press and hold the left button for approximately 3 seconds until CAL appears in the display. Release the left button to enter the calibration mode. 5. Drive the vehicle slowly (less than 5 km/h [3 mph] in a circle until CAL indicator disappears in the display (about two or three circles). 6. The compass is now calibrated. 88