2002 Mazda B4000 Owner's Manual - Page 81

Lights 3. Connect the electrical connector to the new fog lamp bulb. 4. Install the bulb socket in the fog lamp turning clockwise. Replacing high-mount brake lamp and cargo lamp bulbs The replacement of the high-mount brake lamp bulb and cargo lamp bulb is basically the same. This procedure covers the high-mount brake lamp bulb. To remove the brake lamp assembly: 1. Remove the two screws and lamp assembly from vehicle. 2. Remove the bulb socket from lamp assembly by rotating it counterclockwise. 3. Carefully pull bulb straight out of socket and push in the new bulb. To install the brake lamp assembly: 1. Install the bulb socket into the lamp assembly by rotating clockwise. 2. Install the lamp assembly on the vehicle and secure with two screws. Replacing license plate lamp bulbs The license plate bulbs are located behind the rear bumper. To change the license plate lamp bulbs: 1. Reach behind the rear bumper to locate the bulb socket. 2. Twist the socket counterclockwise and remove. 3. Pull out the old bulb from socket and push in the new bulb. 4. Install the bulb socket in lamp assembly by turning it clockwise. 81