2004 Mazda MPV Owner's Manual - Page 208

Interior Comfort Audio System * Noise reduction system manufactured under license from Dolby Laboratories Licensing Corporation. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Ejecting the cassette tape Press the cassette tape eject button ( eject the cassette tape. NOTE Press the APC button ( ) to the beginning of the next selection. Press the APC button ( ) to the beginning of the one being played. To stop this operation and play the cassette tape, press the button again. If APC detects 4 seconds of blank space it will automatically advance the tape to the next selection. NOTE ) to The cassette tape can be ejected when the ignition switch is in the OFF position. Fast-forward/Rewind Press the fast-forward button ( ) to fast-forward. Press the rewind button ( ) to rewind. To stop this operation and play the cassette tape, press the button again. NOTE APC may not operate properly if • A tape was recorded at a low level. • A tape has long, silent intervals. • A tape is a live recording. • A tape has very short intervals of less than 3 seconds. Repeat play This operation makes it possible to listen to a selection repeatedly. Press the repeat button ( ) during play. The current selection playing will be repeated ("RPT" will be displayed). Press the repeat button ( ) once again to cancel repeat play. NOTE When the cassette tape ends during fast-forward or rewind, it automatically stops and starts playing. Reversing Press the program button ( ) to change cassette tape-playing direction. NOTE RPT may not operate properly if • A tape was recorded at a low level. • A tape has long, silent intervals. • A tape is a live recording. • A tape has very short intervals of less than 3 seconds. When the cassette tape ends, the unit automatically reverses play. Automatic program control (APC) APC is used to find the beginning of either the next program or the one being played. 6-29