2004 Mazda Miata MX-5 Owner's Manual - Page 212
2004 Mazda Miata MX-5 Manual
Page 212 highlights
MX-5 Miata_8T72-EA-04G_Edition1 Page212 Wednesday, June 9 2004 3:6 PM Black plate (212,1) In Case of an Emergency Emergency Starting 2. If the booster battery is in another vehicle, don't allow the vehicles to touch. Turn off the engine of the vehicle with the booster battery and all unnecessary electrical loads in both vehicles. 3. Connect the jumper cables in the exact sequence as in the illustration. l WARNING Connecting to Negative Terminal: Connecting the end of the second cable to the negative ( ) terminal of the discharged battery is dangerous. A spark could cause the gas around the battery to explode and injure someone. Connect the cable to a point away from the battery. 4. Start the engine of the booster vehicle and run it a few minutes. Then start the engine of the other vehicle. 5. When finished, carefully disconnect the cables in the reverse order described in Step3. Connect one end of a cable to the positive terminal on the discharged battery (1). Attach the other end to the positive terminal on the booster battery (2). Connect one end of the other cable to the negative terminal of the booster battery (3). Connect the other end to a solid, stationary, exposed metallic point (for example, the trunk latch catch) away from the discharged battery (4). Jumper cable l l l Booster battery Discharged battery Connect cables in numerical order and disconnect in reverse order. Jumper cable 7-14 Form No.8T72-EA-04G