2004 Mazda RX-8 Owner's Manual - Page 192

J60E_8R65-EA-03C_Edition2.book Page 41 Saturday, April 26, 2003 1:48 PM Interior Comfort Interior Equipment M Clock When the ignition switch is in the ACC or ON position, the time is displayed. Time resetting While the clock is displayed, press the SET button 1.5 seconds or more. When the button is released, a beep will sound and the clock will be reset as follows: (Example) 12:01-12:29→12:00 12:30-12:59→1:00 NOTE When the SET button is released, the seconds are reset to "00". M Ambient Temperature Display Time setting 1. Press the CLK button until a beep sounds, and "12Hr" and "24Hr" will be displayed. 2. Press the SET button to switch between "12Hr" and "24Hr" displays. The selected display will flash. To select the desired clock setting, press the CLK button again while the preferred setting is flashing. 3. "Hr. ADJUST" will be displayed next, and the hour portion of the display will flash. Press the SET button to set the hour, then press the CLK button. 4. "Min. ADJUST" will be displayed next, and the minutes portion of the display will flash. Press the SET button to set the minutes, then press the CLK button. NOTE When the ignition switch is in the ON position, press the AMB button to display the ambient temperature. • The displayed ambient temperature may vary from the actual ambient temperature depending on the surrounding area and vehicle conditions. • Press the AMB button 2 seconds or more to switch the display from Fahrenheit to Centigrade or vice versa. 6-41 Form No. 8R65-EA-03C