2005 Mazda MPV Owner's Manual - Page 98

Mazda MPV_8T50-EA-04G_Edition1 Page98 Monday, June 28 2004 3:59 PM Black plate (98,1) Knowing Your Mazda Doors and Locks NOTE l The power sliding doors will not operate unless they are unlocked, and the power sliding doors main switch is in the ON position. The sliding doors can be opened using the power sliding door switches located at the driver's seat, the transmitter, or the exterior door handles even when the child safety locks are in the lock position (page 3-11). The fuel-filler lid does not open when the left power sliding door is opening. The left power sliding door cannot fully open when the fuel-filler lid is open. To fully open the left power sliding door in this situation, carry out the following procedure: 1. Close the left power sliding door. 2. Close the fuel-filler lid. 3. Open the left power sliding door. When the ABS warning light remains illuminated, the power sliding doors cannot be opened electrically(page 5-28). l If you attempt to operate the vehicle in any way other than the above conditions (except step 4) while the power sliding doors are opening/closing electrically, the beep sound will be heard. Moreover, a door that is sliding open will stop. When the above conditions are satisfied, you can resume power sliding door open/ close operation with the switches. Operation from the driver's seat Operate the left/right power sliding door switch to open/close the left/right door. When either power sliding door switch is pressed for 1 second or more, the door controlled by that switch will open/close automatically after the beep sound is heard. Left and right power sliding door switches l l l Opening/Closing with Switches 1. Bring the vehicle to a complete stop. 2. Put the shift lever in park (P). 3. Set the parking brake. 4. Unlock the sliding doors. l NOTE l If a power sliding door switch is pressed again while the beep sound is being heard, the operation can be canceled. Press a power sliding door switch to stop the power sliding doors while they are opening/closing. 5. Look to be sure that the area around the door is clear of people. 6. Press the power sliding doors main switch to the ON position. 3-14 Form No.8T50-EA-04G