2007 Mazda CX-9 Owner's Manual - Page 173
2007 Mazda CX-9 Manual
Page 173 highlights
CX-9_8V83-EA-06I_Edition3 Page173 Monday, February 26 2007 7:18 PM Black plate (173,1) Driving Your Mazda Starting and Driving qTransaxle Ranges The shift lever must be in P or N to operate the starter. P (Park) P locks the transaxle and prevents the front wheels from rotating. WARNING If the engine is running faster than idle, do not shift from N or P into a driving gear: It's dangerous to shift from N or P into a driving gear when the engine is running faster than idle. If this is done, the vehicle could move suddenly, causing an accident or serious injury. Do not shift into N when driving the vehicle: Shifting into N while driving is dangerous. Engine braking cannot be applied when decelerating which could lead to an accident or serious injury. WARNING Always set the shift lever to P AND set the parking brake: Only setting the shift lever to the P position without using the parking brake to hold the vehicle is dangerous. If P fails to hold, the vehicle could move and cause an accident. CAUTION Ø Shifting into P, N or R while the vehicle is moving can damage your transaxle. Ø Shifting into a driving gear or reverse when the engine is running faster than idle can damage the transaxle. R (Reverse) In position R, the vehicle moves only backward. You must be at a complete stop before shifting to or from R, except under rare circumstances as explained in Rocking the Vehicle (page 4-9). N (Neutral) In N, the wheels and transaxle are not locked. The vehicle will roll freely even on the slightest incline unless the parking brake or brakes are on. CAUTION Do not shift into N when driving the vehicle. Doing so can cause transaxle damage. NOTE Apply the parking brake or depress the brake pedal before moving the shift lever from N to prevent the vehicle from moving unexpectedly. D (Drive) D is the normal driving position. From a stop, the transaxle will automatically shift through a 6-gear sequence. M (Manual) M is the manual shift mode position. Gears can be shifted up or down by operating the shift lever. Refer to Manual Shift Mode (page 5-12). 5-11 Form No.8V83-EA-06I