2009 Mazda MAZDA3 Owner's Manual - Page 250

Interior Comfort Interior Equipment qClock NOTE When the trip computer is displayed, press the CLOCK button to change the display to the time. NOTE l l When the: 00 button is pressed, the seconds are reset to 00. Trip computer-equipped vehicles do not have a reset function. When the ignition switch is in the ACC or ON position, the time is displayed. Switching between 12 and 24-hour clock time 1. Press the audio control dial several times until 12Hr and 24Hr clock time are displayed. 2. Turn the audio control dial in either direction, select the desired clock setting, and then press the audio control dial. Press the dial while the preferred clock time is flashing. qAmbient Temperature Display í Time setting 1. Press the CLOCK button until the beep sounds and the displayed time flashes. 2. Press the H button to set the hour. 3. Press the M button to set the minutes, then press the CLOCK button. Time resetting 1. Press the CLOCK button until the beep sounds and the displayed time flashes. 2. Press the: 00 button. When the button is pressed, the beep sounds and the clock resets as follows: (Example) 12:01―12:29→12:00 12:30―12:59→1:00 With fully automatic type air conditioner When the ignition switch is in the ON position, press the AMB switch (page 6-11) on the air conditioner control panel to display the ambient temperature. Press the AMB switch again to switch the display from ambient temperature to the temperature set for the air conditioner. 6-66 í Some models.