2010 Mazda CX-7 Owner's Manual - Page 110

CX-7_8AS7-EA-09E_Edition2 Page110 Friday, June 5 2009 2:24 PM Black plate (110,1) Knowing Your Mazda Doors and Locks Auto lock/unlock function í Settings can be changed using the following operation. Function number 1 2 Function The auto door-lock function is disabled. All the doors and the liftgate lock automatically when the vehicle speed is about 20 km/h (12 mph) or more. All the doors and the liftgate lock automatically when the vehicle speed is about 20 km/h (12 mph) or more. All the doors and the liftgate unlock when the ignition is switched from ON to ACC or Off. When the ignition is switched ON and the shift lever is shifted from park (P) to any other gear position, all the doors and the liftgate lock automatically. When the ignition is switched ON and the shift lever is shifted from park (P) to any other gear position, all the doors and the liftgate lock automatically. When the shift lever is shifted to park (P) while the ignition is switched ON, all the doors and the liftgate unlock automatically. WARNING Do not pull the inner handle on a front door: Pulling an inner handle on a front door while the vehicle is moving is dangerous. Passengers can fall out of the vehicle if a front door accidentally opens, which could result in death or serious injury. When the vehicle speed exceeds 20 km/h (12 mph), all doors and the liftgate lock automatically. l When the ignition is switched off, all doors and the liftgate unlock automatically. These functions can also be disabled so that they do not operate. l 3 4 Auto lock/unlock function setting change using door-lock switch The doors and the liftgate can set to lock or unlock automatically by selecting any one of the functions from the following table and using the driver's door-lock switch on the interior to perform the setting change as indicated in the procedure which follows. 5 1. Stop the vehicle and close all the doors. 2. Switch the ignition ON. 3. Press and hold the lock side of the driver's door-lock switch within 10 seconds of switching the ignition ON, and make sure a beep sound is heard about eight seconds afterwards. 4. Referring to the auto lock/unlock function setting table, determine the function number for the desired setting and press the unlock side of the driver's door-lock switch only in the amount of the selected function number (Ex. If you select function 2, press the unlock side of the switch only 2 times). 3-34 í Some models. Form No.8AS7-EA-09E