2003 Mercedes G-Class Owner's Manual - Page 142
2003 Mercedes G-Class Manual
Page 142 highlights
Controls in detail Transfer case Press upper half 1 ("LOW") of the transfer case switch. Once the shift is complete, gear position L is displayed in the transfer case indicator. Put gear selector in D. Switching from LOW to HIGH Put gear selector in D. Messages in the multifunction display If a shift was not completed and the multifunction display shows one of the following messages: TC SHIFT CONDITIONS NOT FULFILLED TC SHIFT - CANCELLED The shift did not take place. Repeat the shift procedure. TRANSFER CASE - VISIT WORKSHOP! There is a malfunction in the system. Have the vehicle checked at your authorized Mercedes-Benz Light Truck Center as soon as possible. ! The shift procedure can only be performed when: The engine is running. The selector lever for the automatic transmission is in position N. The vehicle speed does not exceed 40 mph (70 km/h). Press lower half 2 ("HIGH") of the transfer case switch. Once the shift is complete, gear position H is displayed in the transfer case indicator. The shift does not occur. At least one shift condition was not met. Repeat the shift procedure. TC IN NEUTRAL i If the SmartKey is in starter switch position 0 or 1, an alarm will sound if the transfer case is in position N and the driver's door is opened. Engage transfer case to gear position HIGH or LOW. More information can be found in the "Practical hints" section ( page 266). The shift does not occur. The transfer case is in neutral. The gear position N is displayed in the transfer case indicator 1. Repeat the shift procedure. Warning! G If TC is in neutral, transmission position P will not hold vehicle. The parking brake must be applied to hold vehicle in place. 142