2004 Mercedes SL-Class Owner's Manual - Page 343

Practical hints Flat tire Remove tire valve core 6 from valve stem 1 using valve stem tool 2. Keep tire valve 6 clean and dry. Remove plug 5 from end of hose 4. Push hose 4 onto valve stem 1. Hold TIREFIT container 3 upside down (hose down) and squeeze firmly several times until entire contents of the container are in tire. Pull hose 4 off and screw tire valve 6 tightly into the valve stem 1 using the valve stem tool 2. i If the removed tire valve core is dirty, use the spare tire valve core stored with the valve stem tool. Reinstall valve cap on valve stem 1. Install plug 5 onto end of hose 4. Drive the vehicle back and forth very slowly approximately 30 ft (10 m). This distributes the TIREFIT sealant material inside the tire. Take the electric air pump out of the trunk. Warning! i If sealant has leaked out, let it dry. You can then peel it off. G Observe safety instructions on air pump label. 342