2005 Mercedes S-Class Owner's Manual - Page 312

Operation Tires and wheels Reactivating the tire inflation pressure monitor The tire inflation pressure monitor must be reactivated in the following situations: If you have changed the tire inflation pressure If you have replaced the wheels or tires If you have installed new wheels or tires Using the tire placard on the driver's door B-pillar or, if available, the inside of the fuel filler flap, make sure the tire inflation pressure of all four tires is correct. Press button j or k repeatedly until you see the current tire inflation pressures for each tire appear in the multifunction display or the following message appears in the multifunction display: TIRE PRES. DISPLAY APPEARS AFTER DRIVING A FEW MINUTES i If you are transporting a deflated tire in the vehicle, do not activate the tire inflation pressure monitor until the deflated tire is no longer in the vehicle you have inflated the tire to the correct tire inflation pressure Press the reset button J on the instrument cluster ( page 140). The following message will appear in the multifunction display: MONITOR CURRENT TIRE PRESSURES? Press the æ button. The following message will appear in the multifunction display: TIRE PRES. MONITOR REACTIVATED The tire inflation pressure monitor will now monitor the tire inflation pressure values of all four tires. The following message will appear in the multifunction display field: TIRE PRES. DISPLAY APPEARS AFTER DRIVING A FEW MINUTES This display appears until the individual tire inflation pressure values are matched with the tires. The individual values are then displayed ( page 308). 310