2010 Mercedes ML-Class Owner's Manual - Page 85
2010 Mercedes ML-Class Manual
Page 85 highlights
Seats X 83 X Head restraint height adjustment, manual This feature is only available in vehicles without memory function. Raising: Adjust the height of head restraint : by pulling it upward. If head restraint : is fully retracted, press release button ; in direction of arrow and pull head restraint : upward. X Lowering: Press release button ; in direction of arrow and press down on head restraint :. Head restraint fore and aft adjustment G Warning! For your protection, drive only with properly positioned head restraints. Adjust the head restraint so that it is as close to the head as possible and the center of the head restraint supports the back of the head at eye level. This will reduce the potential for injury to the head and neck in the event of an accident or similar situation. Do not drive the vehicle without the seat head restraints. Head restraints are intended to help reduce injuries during an accident. With a rear seat occupied, make sure to move the respective head restraint up from the lowest non-use position and have the occupant adjust the head restraint properly. G Warning! Vehicles with Rear Seat Entertainment System: When adjusting the head restraint, make sure your fingers do not become caught between the head restraint cushion and the monitor. Failing to do so may lead to injury. ! Do not attempt to remove front seat head restraints. They can only be removed by qualified technicians. We recommend that you have this work carried out by an authorized Mercedes-Benz Center. X While seated, reach behind you with both hands and find lower edge of the head restraint. X Push or pull on the lower edge of the head restraint cushion to the desired position. Z Controls in detail Seat fore and aft adjustment: Press the switch forward or backward in direction of arrow A. X Seat backrest tilt: Press the switch forward or backward in direction of arrow ?. X Seat height: Press the switch up or down in direction of arrow =. X Seat cushion tilt: Press the switch up or down in direction of arrow ; until your upper legs are lightly supported. X Head restraint height (vehicles with memory function): Press the switch up or down in direction of arrow :.