1999 Mercury Sable Owner Guide 1st Printing - Page 66
1999 Mercury Sable Manual
Page 66 highlights
Controls and features 3. Turn the ignition key from RUN/ACC to OFF. 4. Press the power door UNLOCK control three times. 5. Turn the ignition key from OFF to RUN/ACC. A horn chirp indicates the enable/disable feature is entered. 6. Press the power door UNLOCK control one time. 7. Press the power door LOCK control to toggle the Autolock/Relock state. You will receive a horn chirp followed by either a long honk, autolock/relock is enabled, or no honk, autolock/relock is disabled. 8. Turn ignition to OFF. If autolock/relock has been changed, the horn will chirp to confirm procedure is complete. SECURILOCKி PASSIVE ANTI-THEFT SYSTEM The SecuriLock passive anti-theft system provides an advanced level of vehicle theft protection. Your vehicle's engine can only be started with the two special SecuriLock electronically coded keys provided with your vehicle. Each time you start your vehicle, the SecuriLock key is read by the SecuriLock passive anti-theft system. If the SecuriLock key identification code matches the code stored in the SecuriLock anti-theft system, the vehicle's engine is allowed to start. If the SecuriLock key identification code does not match the code stored in the system or if a SecuriLock key is not detected (vehicle theft situation), the vehicle's engine will not operate. The SecuriLock passive anti-theft system is not compatible with aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Large metallic objects or devices such as the Mobil Speedpass on the same key ring as your SecuriLock key may cause vehicle starting problems. These objects and devices cannot damage the SecuriLock key, but can cause a momentary 66