2005 Mercury Grand Marquis Owner Guide 3rd Printing - Page 60

Driver Controls Reprogramming a single HomeLinkா button To program a device to HomeLink௡ using a HomeLink௡ button previously trained, follow these steps: 1. Press and hold the desired HomeLink௡ button. DO NOT release the button. The display will read CHANNEL "X" (1,2 or 3) TRANSMIT 2. The display will change to CHANNEL "X" (1,2, or 3) TRAINING after 20 seconds. Without releasing the HomeLink௡ button, follow step 2 in the "Programming" section. For questions or comments, contact HomeLink௡ at www.homelink.com or 1-800-355-3515. AUXILIARY POWER POINT (12VDC) The auxiliary power point for five passenger vehicles is located in the floor console storage bin. For six passenger vehicles, the auxiliary power point is located under the cup holder and ashtray drawer in the center stack. Do not plug optional electrical accessories into the cigarette lighter. Use the power point. Do not use the power point for operating the cigarette lighter element. The maximum power each power point can supply depends on the fuse rating. For example: a 20A fuse should supply a maximum of 240 Watts, a 15A fuse should supply a maximum of 180 Watts and a 10A fuse should supply a maximum of 120 Watts. Exceeding these limits will result in a blown fuse. Always keep the power point caps closed when not being used. 60 2005 Grand Marquis (grn) Owners Guide (post-2002-fmt) USA (fus)