2005 Mercury Montego Scheduled Maintenance Guide 4th Printing - Page 28

2005 Mercury Montego Manual

Page 28 highlights

NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 150,000 miles ❑ Change engine oil and replace oil filter. ❑ Inspect tires for wear and rotate. ❑ Inspect brake pads/shoes/rotors/drums, brake ❑ Inspect wheel ends for endplay and noise. ❑ Inspect engine cooling system and hoses. ❑ Change Motorcraft Premium Gold Engine Coolant ❑ Inspect exhaust system and heat shields. ❑ Inspect steering linkage, ball joints, suspension and (see exceptions page 46 and record page 48). lines & hoses, and parking brake system. if equipped, half shafts, driveshaft and U-joints. Replace engine air filter. Replace fuel filter (see page 47). Replace cabin air filter, if equipped. Change automatic transmission/transaxle fluid and filter (except CVT; filter not required on CD4E). Change rear axle lubricant on all rear wheel drive (RWD) vehicles (see pages 42 and 46). Replace accessory drive belt(s) (if not replaced within last 100,000 miles). Replace climate-controlled seat filters if equipped (Navigator, Expedition, and Aviator). Inspect PCV for flow (5.4L 3V and 6.8L 3V engines). Lubricate 4X2 ball joints and steering linkage if equipped with zerk fittings. Replace 4X2 wheel bearings and grease seals, lubricate and adjust bearings. Inspect and lubricate 4X4 front axle shaft U-joints (F250/350/450/550 and Excursion). Change front axle lubricant (4X4 only). Change transfer case fluid (4X4 only). Multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 28 Scheduled Maintenance Normal Schedule Trucks, Fullsize Vans & SUVs

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

150,000 miles
Change engine oil and replace oil filter.
Inspect tires for wear and rotate.
Inspect brake pads/shoes/rotors/drums, brake
lines & hoses, and parking brake system.
Inspect wheel ends for endplay and noise.
Inspect engine cooling system and hoses.
Change Motorcraft Premium Gold Engine Coolant
(see exceptions page 46 and record page 48).
Inspect exhaust system and heat shields.
Inspect steering linkage, ball joints, suspension and,
if equipped, half shafts, driveshaft and U-joints.
Replace engine air filter.
Replace fuel filter (see page 47).
Replace cabin air filter, if equipped.
Change automatic transmission/transaxle fluid
and filter (except CVT; filter not required on
CD4E).
Change rear axle lubricant on all rear wheel
drive (RWD) vehicles (see pages 42 and
46).
Replace accessory drive belt(s) (if not replaced
within last 100,000 miles).
Replace climate-controlled seat filters if equipped
(Navigator, Expedition, and Aviator).
Inspect PCV for flow (5.4L 3V and 6.8L 3V
engines).
Lubricate 4X2 ball joints and steering linkage if
equipped with zerk fittings.
Replace 4X2 wheel bearings and grease seals,
lubricate and adjust bearings.
Inspect and lubricate 4X4 front axle shaft U-joints
(F250/350/450/550 and Excursion).
Change front axle lubricant (4X4 only).
Change transfer case fluid (4X4 only).
Multi-point inspection (recommended)
D
EALER
V
ALIDATION
:
RO#:
P&A C
ODE
:
D
ATE
:
M
ILEAGE
:
N
ORMAL
S
CHEDULE
T
RUCKS
, F
ULLSIZE
V
ANS
& SUV
S
28
Scheduled Maintenance
Normal Schedule Trucks, Fullsize Vans & SUVs