2007 Mercury Grand Marquis Owner Guide 2nd Printing - Page 257
2007 Mercury Grand Marquis Manual
Page 257 highlights
Item Automatic transmission fluid (4R75E) 13.9 quarts (13.2L)3 Motorcraft MERCON V ATF4 XY-80W90-QL / WSP-M2C197-A ZC-32-A / WSB-M8B16-A2 XT-5-QM / MERCON V 5.0 pints (2.4L)6 Fill to line on reservoir Rear axle fluid5 Windshield washer fluid Fuel Tank Motorcraft SAE 80W-90 Premium Rear Axle Lubricant Motorcraft Premium Windshield Washer Concentrate 2007 Grand Marquis (grn) Owners Guide (post-2002-fmt) USA (fus) Capacity Ford part name Ford part number / Ford specification Maintenance and Specifications 257 19.0 gallons - - (71.9L) 1 Add the coolant type originally equipped in your vehicle. 2 Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C930-A and the API Certification mark. 3 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 4 Automatic transmissions that require MERCON V should only use MERCON V fluid or fluid that is specified dual usage MERCON/MERCON V. Refer to scheduled maintenance information to determine the correct service interval. Use of any fluid other than the recommended fluid may cause transmission damage. 5 Rear axles are considered lubricated for life when the vehicle is used for normal service. For severe duty requirements, see Exceptions and / or Special Operating Conditions in scheduled maintenance information. Add 4 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok rear axles. 6 Service refill capacities are determined by filling the rear axle 1/4 inch to 9/16 inch (6 mm to 14 mm) below the bottom of the filler hole.