2008 Mercury Mountaineer Owner Guide 2nd Printing (Spanish) - Page 545

Driver Controls Running Boards (if equipped) This feature automatically deploys the side running boards for easy entry/exit from the vehicle or for cleaning. Refer to Running boards in this chapter for more information. 1. To change operation of the power running board feature, select this function from the SETUP MENU. 2. Press the RESET control to select the running boards setting as follows: • AUTOMATIC: the running boards will automatically deploy when a door is opened and automatically retract when the door is closed, • OUT: the running boards will remain OUT regardless of the doors being open/closed. For example, use this setting when washing the vehicle, or • OFF: the running boards will remain IN regardless of the doors being open/closed. 3. Press the RESET control for the next SETUP MENU item or wait for more than 4 seconds to return to the INFO menu. Easy entry/exit seat (if equipped) This feature automatically moves the drivers seat backwards for easy exit from the vehicle. 1. To disable/enable the easy exit seat feature, select this function from the SETUP MENU. 2. Press the RESET control to turn the easy entry exit seat ON or OFF. 3. Press the RESET control for the next SETUP MENU item or wait for more than 4 seconds to return to the INFO menu. Reverse Sensing System (Park Aid) (if equipped) This feature sounds a warning tone to warn the driver of obstacles near the rear bumper, and functions only when R (Reverse) gear is selected. 125 2008 Mountaineer (mnt) Owners Guide (post-2002-fmt) USA (fus)