2008 Mercury Sable Scheduled Maintenance Guide 3rd Printing - Page 22

NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 75,000 miles ❑ Change engine oil and replace oil filter ❑ Replace cabin air filter (if equipped) ❑ Inspect steering linkage, suspension and, if ❑ Inspect engine cooling system and hoses ❑ Inspect brake pads, shoes, rotors, drums, brake equipped, driveshaft, ball joints and U-joints lines and hoses and parking brake system. Inspect half shaft boots (if equipped) Inspect exhaust system and heat shields Inspect engine air filter Inspect automatic transmission fluid level (if equipped with an underhood dipstick) Lubricate ball joints and U-joints (if equipped with zerk fittings) Inspect and lubricate 4x4 front axle U-joints Perform multi-point inspection (recommended) Rotate tires, inspect tires for wear and measure tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect wheels for end play and noise DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 82,500 miles Change engine oil and replace oil filter Perform multi-point inspection (recommended) Rotate tires, inspect tires for wear and measure tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect wheels for end play and noise RO#: DATE: DEALER VALIDATION: P&A CODE: MILEAGE: 22 Scheduled Maintenance 2008 (smg) Scheduled Maintenance Guide USA (fus)