2000 Nissan Maxima Owner's Manual - Page 209

EXPLANATION OF MAINTENANCE ITEMS Additional information on the following items with "*" is found in the "8. Do-ityourself" section. conditions, the engine oil and oil filter should be replaced in accordance with the maintenance schedule. However, under severe driving conditions, they may have to be replaced more frequently. Spark plugs*: Replace with new plugs having the correct heat range. Intake & exhaust valve clearance: Check the valve clearance if valve noise increases. damage, looseness and leakage of oil or grease. Under severe driving conditions, they may have to be inspected more frequently. Exhaust system: Visually check the exhaust pipes, muffler, and hangers for proper attachment, leaks, cracks, chafing, abrasion, deterioration, etc. Under severe driving conditions, inspection should be performed more frequently. Supplemental air bag, and supplemental side air bag (if so equipped) systems: Maintenance for the supplemental air bags or supplemental side air bags should be done by an authorized NISSAN dealer. Automatic Speed Control Device (ASCD) vacuum hoses: Check vacuum hose (between ASCD actuator and ASCD pump) for breakage, cracks or fracture. Emission control system maintenance Drive belts*: Check drive belts for wear, fraying or cracking and also for proper tension. Replace the drive belts if found damaged. Air cleaner filter: Under normal driving conditions, the air cleaner filter should be replaced in accordance with the maintenance schedule. However, driving the vehicle in dusty areas may cause more rapid clogging of the element. Consequently, the element may have to be replaced more frequently. EVAP vapor lines: Check EVAP vapor lines and connections for failure or looseness. If leaks are found, replace them. Fuel lines: Check the fuel hoses, piping and connections for leaks, looseness or deterioration. Replace any parts if they are damaged. Engine coolant*: Drain and flush the cooling system. Engine oil & oil filter*: Under normal driving Chassis and body maintenance Brake lines & cables: Check the brake lines and hoses (including brake booster vacuum hoses, connections & check valve) and parking brake cables for proper attachment, leaks, cracks, chafing, abrasion, deterioration, etc. Brake pads & rotors: Check these and the other neighboring brake components for wear, deterioration and leaks. Under severe driving conditions, they may have to be inspected more frequently. Manual transaxle oil & automatic transaxle fluid*: Check the fluid level and visually inspect for signs of leakage. Under severe driving conditions, the oil should be replaced at the specified interval. Steering gear & linkage, axle & suspension parts, and front drive shaft boots: Check for 9-10 Maintenance